WORKSHOP ESSENTIALS COMBINATION LIFT TYRE CHANGER AND WHEEL BALANCER AWWEC011*

*6 months interest free finance available

AECL240CF DCA is a direct drive asymmetric arms lift with a USA type longer inverse cylinder can lift vehicles weighing 4 tonne to a height of approx. 1800mm in 50 seconds. Being Clear floor it is ideal for working on gear boxes, diffs and oil changing as there are no obstacles. Registered with WorkSafe NSW. Includes FREE 4x4 extensions.

AVAILABLE IN SINGLE OR THREE PHASE WITH ELECTRIC CONTROL PANEL AND REMOTE CONTROL
*GET 6 MONTHS INTEREST FREE

Specifications:

• Multi-lateral shape column to guarantee safety and stability.
• Dual-hydraulic direct drive design lifting 4 tonne (8818.5lbs),
• Clear floor for easy access and under vehicle movement
• Asymmetric arm design 2/3 arm extensions, make the lift able to accommodate a wide range of vehicles
  
• Single point electric unlock, easy and safe operation.
• Overall height 3750mm
• Durable cylinders in each column carry with anti-surge valves
  
• Dual balancing cable remote control for precise carriage movement.
• Mechanical safety locks in each post.
• Safety cutout switch to prevent cylinder detachment
• 24V low tension control and limit switch for safe operation.
• Available in 3 phase and (single phase at additional $56)
• Quality hydraulic and electrical component, no oil relief, no noise and less maintenance requirements.
• Colour RAL5015 blue with yellow arms
• Overhead automatic cut off system prevents the vehicle from over extension.
• Screw-up lifting pads with clearance height less than 95 mm
  
• Certified by CE.
• SAFEWORK NSW REGISTERED HST 6-211522/17
  
• 4500kg or 5000kg capacity also available.
• 1880mm lift height.
• Minimum height 90mm
• Durable painted coating
• Twin screw pads included to 95mm height.
• Standard door protection pads to prevent possible damage to the door opened without caution.

TYRE CHANGER WITH SUPPORTING ARMS
AND EURO FULLY AUTOMATIC LASER WHEEL BALANCER COMBINATION
AECB3020 + AETC980N+240

The TYRE CHANGER WITH STRONG ARM SUPPORT AETC980N+240S has enjoyed market dominance for over ten years making it one of the most reliable machines on the market today. We've combined it with the latest wheel balancer from World Bright.

AECB3020 EURO DESIGN WHEEL BALANCER
Retain the original history of balancing, demonstrate the strength of high precision in modern times.

Description

Italy's latest operating system software, accurate resolution could be 1.4 °, the perfect combination of LED high digital tube and the light touch which can withstand 200,000 times, Lower power and energy-saving motor is just 90w, greatly reducing the cost.

The machine has Italian software, user-friendly.

Manual acquisition of diameter, distance and width. The machine has 5 ALU balancing programs and 2 ALU smart balancing programs.

The machine also has optimization function and weight split function.

The diameter of balancing shaft is 40mm so it can work with standard accessories.

The machines can be optionally equipped with motorcycle adaptor.

The calibration is easy to proceed, The machine can quickly get back its precision

LED display

The machine will go into stand-by when it is not being used for a certain time.

Lift weight:760kg L 265cm
x W 120cm x H 48cm

Changer with assisting arm weight: 269kg L 115cm
x W 102cm x H 95cm

Balancer weight :260kg L115, W 95, H 105